摘要:液壓厚度控制系統（AGC）主要是針對鋼板軋機軋輥的位置偏差進行糾正。通過液壓厚度控制系統，可以精確控制液壓軋機軋制鋼板的厚度。其性能好壞或工作是否正常是決定鋼帶質量和產量的關鍵。所以系統的改造和完善，使其精度達到要求，以此來滿足鋼板軋制過程中要求的不斷提高的需求。

　　　本文在總結國內外大量文獻資料的基礎上，從軋機HAGC原理和模型出發，主要針對薄板軋機的軋輥的位置偏差進行反饋糾正控制。本文設計中首先進行了參數的計算，再根據液壓輥縫控制系統的要求進行系統方案的確定，以及相關液壓元件的選擇。然后，使用MATLAB軟件對伺服系統進行仿真，最后，根據伺服控制仿真結果，我們可以判斷系統的控制精度是多少，系統是否穩定，是否合乎控制的工作要求，以及提供理論設計的實驗依據。通過結果可以對系統進行完善和改造，使其達到精度要求，以滿足鋼板軋制過程中不斷提高的要求。

關鍵詞：冷軋機  伺服液壓缸  液壓HAGC  仿真

ABSTRACT:The AGC design system for cold rolling mill hydraulic servo system, mainly for the plate mill roll position deviations feedback and correct, including the design of servo system, the design of the servo cylinder and system simulation, etc. Through the servo control system, can be precisely controlled hydraulic mill rolling steel plate thickness, by according to the simulation results, we can judge the system control accuracy, to see if it satisfy the requirement of the control work, and to provide theoretical design of experimental basis. Through result can constantly of system reform and perfect, make its precision meet the requirements, in order to meet the requirement in the process of rolling steel plate rising demand.

　　　Based on generalizing the domestic and foreign a large of references, this dissertation systematically analyzes the principle and model of the strip mill hydraulic AGC the position deviation that aim at the roller of the steel plate rolling mill machine proceeds the feedback rectifies, among them the design that include the servomotor, pump the assemble that stands to imitate true etc. Firstly, the design, dollar a design for of choice, pumping standing of the calculation, system of the design inside parameter, gather whole piece .What’s more, we could imitate with the system function true by MATLAB . With the system, pass this set of servocontrols system result, we can judge how much accuracy is that system requests and provide the experiment that theories design according to ,pass result can proceed to the system perfect with reform, made its stain the accuracy request, then satisfy in the steel plate roll system process continuously increase of request.

Keywords: Cold rolling mill ; Servo hydraulic cylinder ; Hydraulic HAGC ; The simulation